Armored Riot Control Truck (RCT-4)

call for prices

Armored Riot Control Truck (RCT-4) offers customization for the interior as well as installed Gunports. Global LAV(813)602-1748

Description

Armored Riot Control Truck (RCT-4)

Armored Riot Control Truck (RCT-4) Features:

Make: Ford
Model: F-750 (RCT-4)
GVWR: up to 37,000 lbs
Seating: 2 + 2 Crew
Engine: 6.7L ISB Cummins Turbo Diesel
Transmission: 6-Speed Allison Automatic
Power: 362 hp @ 4,750 rpm
Tire: 11R22.5H (run-flat inserts)
Height: 124 in. (315 cm)
Length: 350 in. (889 cm)
Width: 102 in. (259 cm)
Wheelbase: 230 in. (584 cm)
Final Weight: 22,000 lb – 29,000 lb

 

GENERAL ARMORING SPECIFICATIONS…

  • All original glass is removed and replaced with NIJ tested multi-layered ballistic glass
  • All opaque material surrounding passenger area is replaced with hardened ballistic steel
  • Protection against high-power rifles such as 7.62×39, 5.56×45, 7.62×51 and M80 ball
  • Roof (at an angle) & floor (anti-mine protection including DM51 grenade/fragmentation)
  • Additional areas of armoring are fuel tank, battery and computer module
  • P.A./multi-siren system and LED strobe lights, per client’s request
  • Reinforced door hinges to support additional weight of the armor
  • Additional hardened ballistic steel plating for the undercarriage
  • An optional vision enhancement system (camera/monitor)
  • Patented designed armoring for firewall and wheel wells
  • A complete set of six (6) high-grade Run-Flat inserts installed
  • Gunports installed on selected doors and/or windows
  • All door and window openings are overlapped
  • Customization per client’s specifications
  • Optional customization for the interior
  • Custom tailpipe protection
Water Cannon- Tank Specifications for this vehicle:
  • Tank – 6,000 liter, 1 compartment Aluminum
  • 3/16 Aluminum skin
  • 1/4 aluminum bottom
  • 3/16 outriggers & cross members at all baffles
  • Fully dished & flanged baffles
  • No walk walkway
  • One 3″ tank overflow pipe welded in center
  • U.L.C. approved P.A.F. Tiona manhole cover
  • No spill containment around manhole
  • TANK MOUNTING – Oakwood sills, full length
  • Flange type mounting
  • Four point spring mounting at front
  • P.T.O. – HD “HOT SHIFT” air operated
  • Control switch in cab
  • Chassis must be equipped with PTO outlet
  • SHAFT – HD P.T.O. shaft
  • Steel wire mesh cage surrounding PTO/ shaft
  • WS DARLEY HM 500 pump
  • 500gpm Max pressure 250 PSI @ 250gpm
  • One 3″ Drafting facility Located at side of unit
  • Storks Connection c/w 2 10 ft. suction hose
  • PUMP Pressure Control
  • High strength bronze alloy
  • Designed for pump relief
  • Valve automatically activate at preset pressure
  • on and off selector valve
  • Large hand wheel for pressure setting control
  • Flush valve and strainer
  • Relief valve position lights
  • Override valve allows manual control
  • SUCTION – One 4″ suction line from tank
  • One 3″ suction ball valve to allow drafting
  • One 4″ removable strainer
  • Schedule 40 3″ pressure line monitor
  • 2 monitors installed one at front & rear of unit
  • With flows up to 500 GPM (1900 LPM)
  • Water shoots continuous stream or in pulses
  • Controlled by a high-speed joystick
  • Optional Programmable Pulse – Stream Jet
  • Faster Target Acquisition
  • Adjustable Control System
  • 320° Rotation
  • 135° Elevation (+45° to -90°)
  • Programmable Pulse – Stream Jet Options
  • Optional high speed valve
  • in length or can be used in continuous mode
  • Style 3563 Shown with Style 417 Tip
  • On 1″ shot bore nozzle c/w stream straightner
  • Electric Control shut off valve and 2.5″ piping
  • Hydrant fill
  • SPECIAL c/w and gate valve for hydrant fill
  • One located on right side of unit
  • Supply & install 2.5″ tank fill line on right side
  • Connected to main pressure line
  • One 2.5 inline ball Valve
  • Piping for water drafting from creek or pond
  • Supply and install electric self primer for pump
  • One 2.5″ X 25 ft hydrant hose
  • HOSE and one 2.5″ camlock connections
  • Supply MC 4 lamp water level indicator
  • Spray system placed under vehicle (for tires)
  • Top side spay system
  • Utilizing pump water and series of water jets
  • Controlled from cab
  • Small control panel between cab seats
  • Panel – Two (2) Monitor control Joy sticks
  • monitor valve controls
  • Pump pressure control
  • Fire suppression switch as required
  • 1 (1) 2.5″outlet on front bumper c/w CSA
  • Ultra-bright LED digital readout
  • Injection percentage from 0.1% to 10.0%
  • Low concentrate/ No concentrate warning
  • Water flow rate gauge
  • Total water used display gauge
  • Injection percentage gauge
  • Total concentrate used gauge
  • Dual-tank capability and calibration
  • Calibrate for each concentrate gauge

 

Global LAV is your total light armoring solution,  We can customize any armoring solution for any project. Operators standing by, +1 813 602 1748.

Reviews

There are no reviews yet.

Be the first to review “Armored Riot Control Truck (RCT-4)”

Your email address will not be published. Required fields are marked *